Description
BIGTREETECH MANTA M8P is a 32-bit printer motherboard developed for Klipper firmware. Plug and Play connection between motherboard and the Raspberry Pi and CM4.
Features of Board
- DSI1, CSI1 Interface for CM4
- Gigabit Ethernet interface (1000M for CM4, 100M for CB1)
- 3 USB 2.0 ports
- Using a BTB board-to-board connection, which can be further reinforced with screws, perfectly compatible with CB1 or Raspberry Pi CM4
- The MCU adopts STM32G0B0RE 32-bit ARM Cortex-M0+ @64MHz chip
- The power chip adopts TPS5450-5A, which supports DC12/24V power input, the output current of the chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of the core board.
- MCU firmware can be upgraded through SD card, or through DFU with Klipper’s make flash command.
Specification of MANTA M5P
- Microprocessor : ARM Cortex-M0+ @64MHz
- Driver Input Voltage : 24V, HV ( Selectable)
- Motherboard Input Voltage : VIN=DC12V or DC24V
- Heated Bed Input Voltage : BED IN=DC12V or DC24V
- Logic Voltage : DC3.3V
- Heating Port : Heated Bed(HB), Heater Cartridge(HE)
- Max. output current heated bed port : 10A, Peak 12A
- Max. output current heater cartridge port : 5.5A , Peak 6A
- Fan Port : Three for CNC Fab (24V/5V Selectable), One for Soc Fan (Voltage is not selectable.)
- Max. output current for Fan port : 1A
- Total current for Heating cartridge, Heating bed, Motor driver and Fan less than 20A
- Extended Interface : BLTouch, Fil-DET, 2xRGB
- Motor Driver Support : TMC5160, TMC2209, TMC2225, TMC2226, TMC2208, TMC2130, ST820, LV8729, DRV8825 ( please call for more details).
- Driver Working Mode : SPI, UART, STEP/DIR
- Motor Driver Interface : X, Y, Z (Dual Z-axis), E0, spare(1 x pc), Total of Five(5)
- Temperature Sensor Interface : 2-way 100K NTC
- Compatible Screen : SPI, DSI, HDMI, LCD(EXP1 + EXP2)
- PC Communication Interface : Nil
- Functional Interface : USB2.0 X 3, LAN, DSI, CSI, SP1, 40 pin-GPIO, HDMI, Soc-card, MCU-Card
- Support Machine Structure : Cartesian, Delta, Kossel, Ultimaker, CoreXY
- Recommended Software : Cura, Simplify3D, Pronterface, Repetier-host, Makerware
BIGTREETECH M4P is a 4-axis motherboard using a CM4 BTB header, which can work with CB1 or CM4 perfectly.
Features of CB1 Board
- CPU: Allwinner H616, Quad-core Cortex-A53 @1.5GHz
- GPU: Mali G31 MP2, support OpenGL3.2
- RAM: 512MB/1GB DDR3L SDRAM
- Display: HDMI2.0A interface, support 4K display
- USB 2.0 port
- 100M Ethernet + 100M WiFi
- The same BTB header as the Raspberry Pi CM4
Specification of CB1 Board
- CPU : Allwinner H616, Quad-core Cortex-A53@1.5GHz
- GPU : Mali G31 MP2, Support OpenGL3.2
- RAM : 1GB DDR3L SDRAM
- Display : Support HDMI 2.0 4K
- USD : 2.0
- Network : 100M Ethernet + 100M Wifi
Note : CB1 does not support DSI/CSI output
Reviews
There are no reviews yet.